Effect of homogenization on anodic film and electrochemical behavior of an A535 alloy after sealing with stearic sealant

Almag 35 (A535) is a commercial aluminum alloy intended for a number of marine components, which is mainly justified by its excellent castability and corrosion resistance. However, the most important factor for corrosion resistance is the formation of intermetallics that can lead the defects in the...

Full description

Bibliographic Details
Published in:Light metals 2022 P. 221-227
Other Authors: Chankitmunkong, Suwaree, Eskin, Dmitry G., Limmaneevichitr, Chaowalit, Pandee, Phromphong, Kengkla, Nattarat, Athchasiri, Jirakit, Tanawansombat, Tanawat, Parnlasarn, Napadol, Diewwanit, Onnjira
Format: Book Chapter
Language:English
Subjects:
Online Access:http://vital.lib.tsu.ru/vital/access/manager/Repository/koha:001003902
LEADER 02637naa a2200421 c 4500
001 koha001003902
005 20230807153221.0
007 cr |
008 230622s2022 sz fs 100 0 eng d
024 7 |a 10.1007/978-3-030-92529-1_30  |2 doi 
035 |a koha001003902 
040 |a RU-ToGU  |b rus  |c RU-ToGU 
245 1 0 |a Effect of homogenization on anodic film and electrochemical behavior of an A535 alloy after sealing with stearic sealant  |c S. Chankitmunkong, D. G. Eskin, C. Limmaneevichitr [et al.] 
336 |a Текст 
337 |a электронный 
504 |a Библиогр.: 20 назв. 
520 3 |a Almag 35 (A535) is a commercial aluminum alloy intended for a number of marine components, which is mainly justified by its excellent castability and corrosion resistance. However, the most important factor for corrosion resistance is the formation of intermetallics that can lead the defects in the oxide film and substrate, as well as activate the corrosion reaction. The characteristics of a sealant on the anodic film were investigated in this work. The alloy was subjected to homogenization at 400 degrees C for 5 h to improve the uniformity of the anodic oxide film due to the decreased number of intermetallics as a result of dissolving in the matrix. It also improved the hardness of this alloy. Electrochemical measurements were conducted to investigate the corrosion behavior. The effects of intermetallics and stearic sealing on the characteristics of the oxide layer are discussed. The decrease in the number of intermetallics can lead to reduced corrosion current density (I-corr) and increased potential corrosion (E-corr), which results in a lower corrosion rate of this alloy. 
653 |a анодные пленки 
653 |a анодное уплотнение 
653 |a коррозия 
653 |a стеариновая кислота 
653 |a гомогенизация 
653 |a алюминиевые сплавы 
655 4 |a статьи в сборниках 
700 1 |a Chankitmunkong, Suwaree 
700 1 |a Eskin, Dmitry G. 
700 1 |a Limmaneevichitr, Chaowalit 
700 1 |a Pandee, Phromphong 
700 1 |a Kengkla, Nattarat 
700 1 |a Athchasiri, Jirakit 
700 1 |a Tanawansombat, Tanawat 
700 1 |a Parnlasarn, Napadol 
700 1 |a Diewwanit, Onnjira 
773 0 |t Light metals 2022  |d Cham, 2022  |g P. 221-227  |k The Minerals, metals & materials series  |z 9783030925284 
852 4 |a RU-ToGU 
856 4 |u http://vital.lib.tsu.ru/vital/access/manager/Repository/koha:001003902 
908 |a статья 
999 |c 1003902  |d 1003902