Critical conditions of forced ignition in Ni-Al, Ti-Al powder systems under solid-phase synthesis

A theoretical study of the critical conditions of forced solid-phase ignition in Ti-Al, Ni-Al systems was carried out. Based on the analysis of the non-stationary diffusion equation with moving boundaries, the critical powers of the heating source and the corresponding critical temperatures were det...

Full description

Bibliographic Details
Published in:Combustion and flame Vol. 248. P. 112575 (1-9)
Main Author: Filimonov, Valeriy Yu
Other Authors: Prokofev, Vadim G., Sobachkin, Alexey V.
Format: Article
Language:English
Subjects:
Online Access:http://vital.lib.tsu.ru/vital/access/manager/Repository/koha:001009723
Перейти в каталог НБ ТГУ
LEADER 02775nab a2200361 c 4500
001 koha001009723
005 20231123174502.0
007 cr |
008 231117|2023 xxu s a eng d
024 7 |a 10.1016/j.combustflame.2022.112575  |2 doi 
035 |a koha001009723 
040 |a RU-ToGU  |b rus  |c RU-ToGU 
100 1 |a Filimonov, Valeriy Yu.  |9 227972 
245 1 0 |a Critical conditions of forced ignition in Ni-Al, Ti-Al powder systems under solid-phase synthesis  |c V. Yu. Filimonov, V. G. Prokof'ev, A. V. Sobachkin 
336 |a Текст 
337 |a электронный 
504 |a Библиогр.: 59 назв. 
520 3 |a A theoretical study of the critical conditions of forced solid-phase ignition in Ti-Al, Ni-Al systems was carried out. Based on the analysis of the non-stationary diffusion equation with moving boundaries, the critical powers of the heating source and the corresponding critical temperatures were determined during the formation of NiAl, TiAl3 intermetallic compounds using the state diagrams of these binary systems. The diffusion activation energies, frequency factors, particle sizes, and heat removal conditions were considered as variable parameters. The diagrams of critical parameters which relate the corresponding specific heating powers with the indicated values were constructed. It has been established that for the same values of the parameters and under identical synthesis conditions, the critical temperatures in these systems differ by more than one hundred degrees. The latter is associated with a significant difference in the width of the solubility region for the corresponding compounds of the composition NiAl, TiAl3. The performed analysis allows separating the modes of isothermal sintering and thermal explosion which makes it possible to control the thermal and diffusion modes of synthesis. The comparison of the calculation results with the experimental data showed their satisfactory agreement. 
653 |a порошковые системы 
653 |a твердофазная диффузия 
653 |a энергия активации 
653 |a удельная поверхность 
653 |a тепловой взрыв 
655 4 |a статьи в журналах  |9 899611 
700 1 |a Prokofev, Vadim G.  |9 106042 
700 1 |a Sobachkin, Alexey V.  |9 899612 
773 0 |t Combustion and flame  |d 2023  |g Vol. 248. P. 112575 (1-9)  |x 0010-2180  |w 0210-36960 
852 4 |a RU-ToGU 
856 4 |u http://vital.lib.tsu.ru/vital/access/manager/Repository/koha:001009723 
856 |y Перейти в каталог НБ ТГУ  |u https://koha.lib.tsu.ru/cgi-bin/koha/opac-detail.pl?biblionumber=1009723 
908 |a статья 
999 |c 1009723  |d 1009723 
039 |b 100